Load data for .219 Zipper + .224 | 50gr | Rhino Solid Shank

Recommended Powder(s): Alliant AR-Comp

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.224 \| 50gr \| Rhino Solid Shank
Bullet Weight:	50gr \| 3.2g
Bullet Diameter:	0.224" \| 5.69mm
Bullet Length:	0.497" \| 12.6mm
Caliber:	.219 Zipper load data
Case Length (l3):	1.933" \| 49.1mm
Cartridge Length (C.O.L.):	2.226" \| 56.5mm
Seated Depth:	0.204" \| 5.2mm
Shank Seated Depth:	0.204" \| 5.2mm
Case Capacity:	34.0 Grains of Water \| 2.21 cm³
Primer Size:	Small Rifle (SR)
Max. allowed Pressure:	41336 psi \| 2850 bar
LID:	LID_B5214_C58
Last updated:	2025-01-01

Load data for 46 loads in caliber .219 Zipper with .224 | 50gr | Rhino Solid Shank bullet and 23 powders such as Alliant AR-Comp. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate 2015	<<locked>>	85%	36361	88%	**45	97%
Accurate 2495	<<locked>>	92%	37043	90%	**40	97%
[Accurate 2520]*	<<locked>>	90%	36927	89%	**97	93%
Accurate 4064	<<locked>>	97%	36782	89%	**20	95%
Alliant AR-Comp 👍	<<locked>>	90%	37115	90%	**59	99%
[Hodgdon Benchmark]*	<<locked>>	85%	36753	89%	**92	91%
Hodgdon H322	<<locked>>	86%	37115	90%	**97	95%
Hodgdon TrailBoss	<<locked>>	96%	30647	74%	**13	100%
IMR 3031	<<locked>>	94%	36129	87%	**33	96%
[Lovex D073.6]*	<<locked>>	92%	36927	89%	**97	93%
[Norma 202]*	<<locked>>	90%	36927	89%	**74	94%
ReloadSwiss RS 14	<<locked>>	96%	30371	73%	**56	100%
[ReloadSwiss RS 40]*	<<locked>>	83%	36042	87%	**31	92%
[Rottweil R 901]*	<<locked>>	88%	37202	90%	**54	94%
[SNPE Vectan Tubal 3000]*	<<locked>>	87%	36260	88%	**72	94%
SNPE Vectan Tubal 5000	<<locked>>	94%	35897	87%	**72	95%
[Shooters World Match Rifle]*	<<locked>>	92%	36927	89%	**97	93%
Somchem S335	<<locked>>	88%	36027	87%	**89	95%
Vihtavuori N130	<<locked>>	85%	36680	89%	**12	98%
Vihtavuori N133	<<locked>>	90%	36230	88%	**05	97%
Vihtavuori N135	<<locked>>	96%	32242	78%	**72	95%
Vihtavuori N140	<<locked>>	93%	37159	90%	**54	95%
[Vihtavuori N540]*	<<locked>>	92%	36100	87%	**54	94%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate 2015	<<locked>>	81%	31647	77%	**20	96%
[Accurate 2495]*	<<locked>>	81%	25179	61%	**99	92%
[Accurate 2520]*	<<locked>>	85%	30806	75%	**33	90%
[Accurate 4064]*	<<locked>>	88%	27485	66%	**51	90%
Alliant AR-Comp	<<locked>>	81%	27891	67%	**74	96%
[Hodgdon Benchmark]*	<<locked>>	83%	34403	83%	**33	90%
[Hodgdon H322]*	<<locked>>	81%	31009	75%	**23	93%
Hodgdon TrailBoss	<<locked>>	81%	24004	58%	**39	100%
[IMR 3031]*	<<locked>>	83%	26339	64%	**12	90%
[Lovex D073.6]*	<<locked>>	87%	30806	75%	**33	90%
[Norma 202]*	<<locked>>	83%	28703	69%	**48	90%
ReloadSwiss RS 14	<<locked>>	81%	23917	58%	**82	100%
[ReloadSwiss RS 40]*	<<locked>>	81%	33620	81%	**59	91%
[Rottweil R 901]*	<<locked>>	81%	30356	73%	**61	91%
[SNPE Vectan Tubal 3000]*	<<locked>>	81%	29182	71%	**72	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	85%	27209	66%	**13	90%
[Shooters World Match Rifle]*	<<locked>>	87%	30806	75%	**33	90%
[Somchem S335]*	<<locked>>	81%	28601	69%	**69	91%
Vihtavuori N130	<<locked>>	81%	32895	80%	**13	97%
[Vihtavuori N133]*	<<locked>>	81%	27253	66%	**40	93%
[Vihtavuori N135]*	<<locked>>	87%	24482	59%	**03	90%
[Vihtavuori N140]*	<<locked>>	84%	28355	69%	**05	90%
[Vihtavuori N540]*	<<locked>>	86%	29631	72%	**61	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data